Icom IC-M604 Instruction Manual

Also see for IC-M604: Instruction manual Service manual Instruction manual Service manual Instruction manual

155SCAN OPERATION5Scan starts. When a signal is received25W25W INTINTDUPDUPTAGTAGNORMALNORMAL SCANSCAN3434°34.506N34.506N123123°23.236W23.236WUTCUTC 1212:00:00BUSYBUSY 25W25W INTINTDUPDUPNORMALNORMAL SCANSCAN3434°34.506N34.506N123123°23.236W23.236WUTCUTC 1212:00:00 SAFETYSAFETYAGing.ral.nelec.AG Starting a scanSet scan type (Priority or Normal scan) and scan resumetimer in advance using Set mode. (p. 43)q While pushing and holding [H/L], push [CH/WX] severaltimes to select the channel group, if desired.w Set TAG channels as described at left.e Make sure the squelch is closed to start a scan.r Push [F], then push [4• ] to start Priority or Normalscan.• “PPRRII--SSCCAANN 1166” or “NNOORRMMAALL SSCCAANN” appears in the display.• When a signal is detected, scan pauses until the signal disap-pears or resumes after pausing 5 sec. according to Set modesetting. (Channel 16 is still monitored during Priority scan.)• Rotate [SELECTOR] or push [YY]/[ZZ] on the microphone tocheck the scanning TAG channels, to change the scanning di-rection or resume the scan manually.• A beep tones sounds and “1166” blinks when a signal is receivedon Channel 16 during Priority scan.t To stop the scan, push [CLR] or repeat step r.SCN