8 SPECIFICATIONS AND OPTIONS23■ SpecificationsGENERAL• Frequency coverage :Receive 500 kHz–29.999 MHzTransmit 1.6– 2.9999 MHz 4.0– 4.9999 MHz6.0– 6.9999 MHz 8.0– 8.9000 MHz12.0– 13.9999 MHz 16.0– 17.9999 MHz18.0– 19.9999 MHz 22.0– 22.9999 MHz25.0– 27.5000 MHz• Mode : USB, AM, CW, FSK and AFSK(available modes differ with theversion)• Number of channels : 150 channels (max.)3 groups of 50 channels each• Antenna impedance : 50 ø nominal• Usable temp. range : –30°C to +60°C(–22°F to +140°F)• Frequency stability : ±10 Hz(–30°C to +60°C; –22°F to +140°F)( ±20 Hz above 15 MHz for Gen-eral and Marine versions)• Power supply requirement : 13.6 V DC±15%( negative and floating groundsavailable depending on the ver-sion)• Current drain :Transmit (max. output power) 30 AReceive (max. audio output) 2.5 A (negative ground)• Dimensions : 291.4(W)×116.4(H)×315(D) mm(projections not included) 11.3(W)×4.4(H)×12.8(D) in• Weight (approx.) : 7.9 kg; 17.4 lbTRANSMITTER• Output power : 150 W pep(60 W above 24 MHz)• Spurious emissions : –75 dB typical• Carrier suppression : 65 dB typical• Unwanted sideband suppression : 70 dB typical• Microphone impedance : 600 øRECEIVER• SensitivityUSB, CW, AFSK, FSK, (for 12 dB SINAD):0.35 μV typical (1.8–29.9999 MHz)1.0 μV (1.6–1.7999 MHz)6.3 μV (0.5–1.5999 MHz)AM (for 10 dB S/N):2.2 μV typical (1.8–29.9999 MHz)6.3 μV (1.6–1.7999 MHz)32 μV (0.5–1.5999 MHz)• Spurious response rejection : 80 dB typical(1.6–29.9999 MHz)• Audio output power : 4.0 W (at 10% distortionwith a 4 ø load)• Audio impedance : 4 ø(4 to 8 ø acceptable)• Clarity variable range : ±150 Hz■ OptionsAT-130automatic antenna tunerMN-100antenna matcherMN-100Lantenna matcherAH-710folded dipole antennaMatches the transceiver to along wire antenna with a mini-mum of insertion loss.Matches the transceiver to adipole antenna. Covers all HFbands from 1.5 to 30 MHz.8 m (26 ft.) × 2 antenna wiresare included.Matches the transceiver to along wire antenna. Covers allHF bands from 1.5 to 30 MHz.15 m (49 ft.) × 1 antenna wireare included.Covers from 1.9 to 30 MHzband. Has an SO-239 con-nector. Easy to assemble(non-kink construction).OPC-566control cableThe optional control cable forAT-130.All stated specifications are subject to change without no-tice or obligation.approx. 24.5 m; 80.3 ftApproved Icom optional equipment is designed for optimalperformance when used with an Icom transceiver.Icom is not responsible for the destruction or damage to anIcom transceiver in the event the Icom transceiver is usedwith equipment that is not manufactured or approved byIcom.