Icom IC-M72 Instruction Manual

Also see for IC-M72: Service manual Instruction manual Instruction manual

Icom IC-M72 Instruction Manual Manual pdf 19 page image

134BASIC OPERATION4DDChannel name/comment programmingq Push [YY]/[ZZ] to select a channel toprogram.• Push and hold [CH/WX•U/I/C] for 1 sec.to select a channel group, if necessary.w While pushing and holding [ ],push [CH/WX•U/I/C].• The 1st character of the currently pro-grammed name or comment blinks.e Push [YY]/[ZZ] to select a character.r Push [H/L•LOCK] to move to theright; then push [YY]/[ZZ] to select acharacter.• Pushing [16•9], moves to leftt Continue until the desired charactershave been selected, then push[CH/WX•U/I/C] to return to normaloperation.DDOpening comment programmingq While pushing and holding[SCAN•DUAL], turn power ON.• “OC” is displayed and the 1st characterof the currently programmed commentblinks.w Push [YY]/[ZZ] to select a character.e Push [H/L•LOCK] to move to theright; then push [YY]/[ZZ] to select acharacter.• Pushing [16•9], moves to leftr Continue until the desired charactershave been selected, then push[CH/WX•U/I/C] to return to normaloperation.The programmed opening comment is briefly displayed orscrolled when the transceiver is powered ON.However, the opening comment indication can be skippedby pushing [16•9].