Icom IC-M87 Instruction Manual
Also see for IC-M87: Instruction manualInstruction manualInstruction manualInstruction manualInstruction manual
                                                | |
Contents
| 
■ Scan typesScanning is an efficient way to locate signals quickly over awide frequency range. The transceiver has priority scan andnormal scan.In addition, the Auto Scan function is available for standbyconvenience. (p. 18)Set the TAG channels (scanned channel) before scanning.Clear the TAG for unwanted channels which inconvenientlystop scanning, such as those for digital communications.Select the desired Scan type (Priority scan or Normalscan) in the Set mode. (p. 18)NORMAL SCANCH 01 CH 02CH 88CH 05 CH 04CH 03Normal scan, like Priority scan, searches through all TAGchannels in sequence. However, unlike Priority scan,Channel 16 is not checked unless Channel 16 is set as aTAG channel.PRIORITY SCANCH 88CH 01CH 16CH 02CH 05 CH 04CH 03Priority scan searches through all TAG channels in se-quence while monitoring Channel 16. When a signal is de-tected on Channel 16, scan pauses until the signal disap-pears. When a signal is detected on a channel other thanChannel 16, scan becomes Dualwatch until the signal dis-appears.135SCAN OPERATION |
Related manuals for Icom IC-M87
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine