Icom IC-M88 Instruction Manual
Also see for IC-M88: Instruction manualInstruction manuaService manualInstruction manualInstruction manual
                                        | |
Contents
| 
E SOLUTION. REF.o water.p. 11p. 10—• Set squelch to the threshold point.• Set [VOL] to a suitable level.• Drain water from the speaker.pack.p. 22p. 5• Recharge the battery pack.• Check the connection to the transceiver.ower or re-.pgs. 8,9, 29p. 22p. 10• Change channels.• Recharge the battery pack.• Push [H/L•LOCK ] to select high power.• Push [H/L•LOCK ] for 1 sec. to cancel thefunction.p. 12ammed. • Set the desired channels as “TAG” channels. p. 14• Set the beep tones to ON (Fix Beep/UserBeep) in SET mode.p. 18of –35°C torox)• Leave the transceiver at room temperaturefor a while. Turn the power ON to check if theinternal temperature has returned to normal.’s voltage is • Verify the battery voltage is correct.——eiver. • Have the transceiver checked at your localdistributor or dealer to see whether the trans-ceiver works properly or not.— |
Related manuals for Icom IC-M88
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine