Icom IC-M88 Instruction Manual
Also see for IC-M88: Instruction manualInstruction manualInstruction manuaService manualInstruction manual
                                | |
Contents
| 
146 DUAL WATCH/TRI-WATCH DescriptionDualwatch monitors channel 16 while you are receiving an-other channel; tri-watch monitors channel 16 and the callchannel while receiving another channel. Operationq Select the desired operating channel.w Push [SCN•DUAL ] momentarily to start dualwatch; push[SCN•DUAL] for 1 sec. to start tri-watch.• “DUAL” flashes during dualwatch; “TRI” flashes during tri-watch.• Beep tone sounds when a signal is received on channel 16.• Tri-watch becomes dualwatch when receiving a signal on the callchannel.e To cancel dualwatch/tri-watch, push [SCN•DUAL] again.[Example]: Operating tri-watch on INT channel 07.DUALWATCH/TRI-WATCH SIMULATION• If a signal is received on channel 16, dualwatch/tri-watch pauseson channel 16 until the signal disappears.• If a signal is received on the call channel during tri-watch, tri-watch becomes dualwatch until the signal disappears.• To transmit on the selected channel during dualwatch/tri-watch,push and hold [PTT].• If no signal is received, the transceiver enters the power savingcondition for 0.5 sec. after checking the operating channel everycycle.Dualwatch Tri-watchCall channelTri-watch starts.Push for 1 sec.Signal is receivedon call channel.Signal received onchannel 16 takespriority.Tri-watch resumesafter the signaldisappears. |
Related manuals for Icom IC-M88
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine