Icom IC-R2 Instruction Manual

Also see for IC-R2: Service manual Instruction manual

145 MEMORY CHANNELSn Memory bank selectionThe receiver has 400 memory channels in 8 banks for stor-age of often-used frequencies.q Select memory mode with [V/M].w Rotate [DIAL] while pushing [FUNC] to select the desiredmemory banks.• “1” – “3” indicate memory banks 1 to 3; “♦” indicates memorybank 4; “♦1” – “♦3” indicate memory banks 5 to 7; no bank indi-cator indicates memory bank 0.e Rotate [DIAL] to select the desired memory channel.n Memory clearUnwanted memory channels can be cleared (erased). Beforeclearing a memory channel make sure it is no longer neededas cleared memories cannot be recalled.q Select memory mode with [V/M].w Set the memory channel to be cleared with [DIAL].• Rotate [DIAL] while pushing [FUNC] to select a memory bank orprogrammed scan edge channel.e Select VFO mode with [V/M] and push [FUNC] + [ (V/M) MW]momentarily to indicate the selected memory channel.• Do not hold [FUNC] + [ (V/M) MW] for more than 0.5 sec., other-wise the selected memory channel will be overwritten.r Push [FUNC] + [ (MODE) LOCK] for 2 sec. to clear the se-lected memory channel.• 3 beeps sound, then the frequency is cleared.t Push [V/M] to return to VFO mode.MRFMMRFMMRFMSelect memorychannelfor 2 sec.+FUNCmomentarily+FUNCV/M MW V/M MWV/M MWV/M MWMODE LOCK[EXAMPLE]: Clearing memory channel 3 (memory bank 0).FMMRFMMR1FMMR3Memory bank 0 Memory bank 1 Memory bank 7