Icom IC-R7000 Instruction Manual

Also see for IC-R7000: Service manual Instruction manual Service manual

3- 3 REAR PANELFle@AC POWER SOCKET@FUSE HOLDER@ANTENNA CONNECTOR [ANT](@) USB/LSB SELECTOR SWITCH[USB/LSB]_._ ---USB LSB@FM(1)-FM(2) SELECTOR SWITCH[FM(1), FM(2)]FM(2)~~FM(1)(@EXTERNAL SPEAKER JACK [EXT SP]MAOE IN JAPAN@The AC POWER SOCKET connects the IC-R7000 to AC outletsvia the supplied AC cable.This holder contains the fuses for AC power supply. Use the sparefuses provided to replace an old or damaged fuse.Connect an antenna with an impedance of 50 ohms into this antennaterminal. Connect with an Type-N connector.A recommended option as a complement to your receiver systemis the AH-7000 SUPER WIDEBAND OMNIDIRECTIONALANTENNA.This switch controls selection of USB or LSB when operating inSSB mode. Press the switch alternately for USB or LSB operation.When operating in either FM mode or FMn mode, use the selectorswitch to select the passband widths that suit your operating needs.The table below should be referred to when using the selectorswitch.REAR PANEL SWITCHFRONT PANEL POSITIONSMODES FM(1) FM(2)FM 15kHz 150kHzFMn 6kHz 15kHzThis jack provides connection for an external speaker. A speakerwith an impedance of 4 ~ 8 ohms is recommended for optimumaudio performance. Use the supplied speaker plug to connect theexternal speaker to the receiver. When using an external speaker,sound will not be emitted from the internal speaker.-9-