205MEMORY CHANNELSn Channel/bank namesChannel names of up to 8 characters and bank namesof up to 5 characters can be programmed for conve-nience. Programmed names can be easily copied toother channels using the copy/paste function.À Select the desired memory channel.Á Set the frequency (and mode/tuning steps), thenpush and hold the [MW] key.• When no data is programmed, “BLANK” appears andmemory names cannot be programmed. Push [CEs • NAME].• A cursor appears at the first character space of thename area.à Enter the desired name via the keypad.• Push the appropriate keys to input the desired charac-ters.• To erase a character, overwrite with a ‘space’ using the[M-CH • ] key.• To move the cursor forwards or backwards, use the[•t] or [CEs] key.Ä Push [ENT] to input the set name.À Select the desired bank using [ M-CH • BANKs] or[ ENT • BANKt].Á Push [ CEs • NAME].• A cursor appears at the first character space of thename area.• When no data is programmed, (“BLANK” appears) thecursor does not appear. Program a frequency orchange the channel in such cases. Push [•t] to move the cursor to the bank namearea.à Enter the desired name via the keypad.• Use the same method as for channel names (seeabove).Ä Push [ENT] to input the set name.NOTE: When using [ CEs] on the last digit of thebank name, the current name is cleared and theprevious one is substituted. DO NOT forget topush [ENT] after the bank name is set.[CEs• NAME] key1 QZENTBANKENTWXY9NAMECEtoUSR-AUSR-AUSR-A MEMONAMEUSR-A MEMONAMED Channel name programmingD Bank name programmingUSR-AUSR-AUSR-A MEMONAMEMEMONAMEMEMONAMEBANKN MEMONAMEBANKN MEMONAMEENTBANKENT.NAMECE5 times1 QZWXY9to