Icom IC-T2H Instruction Manual

Also see for IC-T2H: Service manual Instruction manual

Memory (call) channel contents can be moved to VFO or toanother memory.O Memory/call > VFOO Select the memory (call) channel to be transferred :~+ Push [AV] ([* (CALL)]) to select memory (call) mode .~+ Push [A]/[V] to select the memory (call) channel .OO Push [s M] for 1 sec . t o transfer the VFO contentsselected memory." VFO mode is selected .to theO Memory/call > memory/callO Select the memory (call) channel to be transferred :kl+ Push [AV] ([*(CALL)]) to select memory (call) mode .,-* Push [A]/[V] to select the memory (call) channel .OO Push [a M] momentarily." "VF" appears and flashes with "m" .O Push [ " ]/[V] to select the target memory.® Push [s M] for 1 sec ." VFO mode is selected and the contents are transferred to the tar-get memory.MEMORY/CALL PROGRAMMINGO Clearing a memoryO Push [e M] to enter memory transfer mode ." "m" and a memory channel number flash .OO Push ["]/[V] to select the memory channel to be cleared ." Memory channels PA, Pb and CH1 cannot be cleared .O Push [e M] momentarily, then within1 sec . push it again for 1 sec .*The contents of the selectedmemory are cleared .® Push [ 4 ] to return to regular operation .