Icom ID-880H Instruction Manual

Also see for ID-880H: Instruction manual Service manual Quick start guide Service manual

Contents

Icom ID-880H Instruction Manual Manual pdf 27 page image

122 BASIC OPERATIOND VFO modeVFO mode is used to set the desired frequency.± Push [VFO/MHz] to select VFO mode.• When VFO mode is already selected, the digits to the right of the10 MHz or 1 MHz digits will disappear depending on version. Inthis case, push [VFO/MHz] again (or twice depending on ver-sion).[VFO/MHz]• VFO mode indicationVFO/LOCK± Push [VFO/LOCK] to select VFO mode.What is VFO?VFO is an abbreviation of Variable Frequency Oscillator. Fre-quencies for both transmitting and receiving are generatedand controlled by the VFO.D Memory modeMemory mode is used for operation on memory channelswhich store programmed frequencies.q Push [M/CALL] to select memory mode.• Push [M/CALL] several times to select Memory/Call/Weather*channels in sequence. * Weather channels are available for theU.S.A. version only.• “X” indicator appears when memory mode is selected.Appears[M/CALL]• Memory mode indicationw Rotate [DIAL] to select the desired memory channel.• Only programmed memory channels can be selected.• See p. 92 for memory programming details.MR/CALLY/Zz Push [MR/CALL] to select memory mode.x Push [] or [] to select the desired mem-ory channel.