Icom ID-880H Service Manual

Also see for ID-880H: Instruction manual Service manual Instruction manual Quick start guide

Contents

Icom ID-880H Service Manual Manual pdf 7 page image

3 - 11. REMOVING TOP AND BOTTOM COVERS1) Unscrew total of 18 screws; 4 screws from the top cover,8 screws from the both sides and 4 screws from thebottom cover.2) Remove the top cover and bottom cover as illustratedbelow.SECTION 3. DISASSEMBLY INSTRUCTION(Continued to right above.)2. REMOVING THE MAIN UNIT1) Remove the IC clip from the chassis.2) Disconnect the speaker cable from the MAIN UNIT, andremove the speaker from the chassis.Top coverBottom coverIC clipSPEAKERCABLESpeakerScrew x4Screw x10COOLINGFAN CABLEUNSOLDERSolderremoverMAIN UNITFront panelLCD plateCONTROL UNITRear panelScrew x4KnobsFront panel2. REMOVING THE MAIN UNIT (continued)3) Unscrew 10 screws from the MAIN UNIT.4) Unscrew 4 screws from the chassis.5) Disconnect the cooling fan cable from the MAIN UNIT.6) Unsolder total of 4 points, and take off the MAIN UNIT.3. DISASSEMBLE THE CONTROL UNIT1) Remove 3 knobs from the front panel.2) Unscrew 4 screws from the rear panel.3) Remove the LCD plate.4) Take off the CONTROL UNIT from the front panel.