Icom IF5061 Instruction Manual
Also see for IC-F5061: Price listInstruction manualOperating guideInstruction manualInstruction manual
                        | |
Contents | 
92 BASIC OPERATION Call procedureWhen your system employs tone signaling (excluding CTCSSand DTCS), the call procedure may be necessary prior to voicetransmission. The tone signalling employed may be a selec-tive calling system which allows you to call specific station(s)only and prevent unwanted stations from contacting you.q Select the desired TX code channel, 2/5-tone code orTalkgroup ID code* according to your System Operator’sinstructions.• This may not be necessary depending on programming.• Refer to pgs. 10–12 for selection.*Digital mode operation only.w Push the call key (assigned to one of the dealer program-mable keys; except for the Digital mode operation) or [PTT].e After transmitting, the remainder of your communicationcan be carried out in the normal fashion. Receiving and transmittingReceiving:q Push [ ] to turn the power ON.w Push [CH Up] or [CH Down] to select a channel, insequence.e When receiving a call, adjust the audio output level to acomfortable listening level.Transmitting:Wait for the channel to become clear to avoid interference.q Take the microphone off hook.• 2/5-tone mute may be released. (The ‘audible’ condition isselected and BUSY indicator lights green.)• A priority channel may be selected automatically.w Wait for the channel to become clear.• The channel is busy when BUSY indicator lights green.e Push [CALL] when initiating a call from your side.• Coded audio may be heard from the transceiver, then “ ”appears.• This operation may not be necessary depending on your signal-ing system. Ask your dealer for details.r While pushing and holding [PTT], speak into the micro-phone at your normal voice level.t Release [PTT] to receive.IMPORTANT: To maximize the readability of your signal;1. Pause briefly after pushing [PTT].2. Hold the microphone 5 to 10 cm (2 to 4 inches) fromyour mouth, then speak into the microphone at a normalvoice level.Selective callingNon-selective calling |
Related manuals for Icom IC-F5061
Icom iF5061/D Instruction Manual
Icom iF5061D Instruction Manual
Icom iF5062D Instruction Manual
Icom IC-F5061 Instruction Manual
Icom IF50V Instruction Manual
Icom IC-F5061/D Instruction Manual
Icom IC-iF3161 Instruction Manual
Icom IC-F5062 Instruction Manual
Icom IC-F5062 Instruction Manual
Icom IC-F5062 Instruction Manual
manualsdatabase
Your AI-powered manual search engine