Icom IF50V Instruction Manual

Icom IF50V Instruction Manual Manual pdf 26 page image

203 BASIC OPERATION! User set modeUser set mode is accessed at power ON and allows you to set sel-dom-changed settings. You can “customize” the transceiver opera-tion to suit your preferences and operating style.Entering the user set mode:q While pushing and holding [ ] and [ ], rotate [VOL] to powerON.• Turn power OFF in advance.• “SET MODE” appears for 1 sec.w Push and hold [P0] for 1 sec. to enter user set mode.e Push [P0] momentarily to select the appropriate item.Then push [ ] or [ ] to set the desired level/condition.• Available set mode functions are Backlight, Beep, SQL Level,Ringer Level, AF Min level, Mic Gain, VOX Gain*, VOX Delay*,Battery Voltage, Signal Moni, Vibration and Lone Worker.r Push and hold [P0] again to exit set mode.* Appears when the optional headset is connected.User set mode is also available using a programmable key. Pleaserefer to p. 13 [User Set Mode] section for instructions regardingusing the key assigned for user set mode.NOTE: [ ], [ ] and [P0] activate while in the user set moderegardless of the assigned key functions.