Icom iDAS IC-F3102D Instruction Manual

Also see for iDAS IC-F3102D: Instruction manual

Icom iDAS IC-F3102D Instruction Manual Manual pdf 35 page image

284dPMR OPERATION1234567891011121314151617181920D Receiving a Group callq When a Group call is received:• The LED indicator blinks orange.• Beeps sound and the mute is released.w Hold down [PTT], then speak into the microphone.NOTE: Only one station is allowed to speak at the sametime.e Release [PTT] to receive a response.r After the communication is finished, push [Clear] to send a ‘Dis-connect’ signal to terminate the connection.NOTE: The LED indicator or Beeps may differ, depending on thepresetting. Ask your dealer for details.D Receiving a Stun, Kill or ReviveIf an individual call with Stun or Kill command is received, the trans-ceiver will automatically transmit the acknowledgement, and thenyou cannot receive* or transmit.* Depending on the received Stun command setting.➥ When a Stun command is received;• The transceiver cannot be operated until the individual call withRevive command is received or until the data cloning is per-formed.• Even if [ROTARY SELECTOR] is changed, the transceiver willkeep the same channel as the Stun command is received.➥ When a Kill command is received;• The LED indicator alternately blinks red and green.• The transceiver cannot be operated until the data cloning isperformed. Ask your dealer for details.NOTE: Depending on the presetting, the transceiver ignores theStun, Revive and Kill commands, which are from a non-specifiedstation.