Icom iF5061D Instruction Manual

Also see for IC-F5060 Series: Other Operating guide Operating guide Instruction manual

Contents

Icom iF5061D Instruction Manual Manual pdf 6 page image

I c o m I n c .q eySpeakerFunction display (p. 2)w rt■ Front panelq AF VOLUME CONTROL KNOB [VOL]Rotate the knob to adjust the desired audio output level.• Minimum audio level is pre-programmed.w LED INDICATOR➥ Lights red while transmitting a signal.➥ Lights green while receiving a signal.e UP/DOWN KEYS [CH Up]/[CH Down]Push to select an operating channel, etc.* The desired function can be assigned by your dealer. (p. 3)r POWER SWITCH [ ]Push and hold for 1 sec. to turn the power ON and OFF.• Automatic scan start, Password prompt and Set mode accessare available at power ON.t DEALER-PROGRAMMABLE KEYSDesired functions can be programmed independently byyour dealer. (p. 3)y MICROPHONE CONNECTORConnect the supplied or optional microphone.NEVER connect non-specified microphones. The pinassignments may be different and the transceiver maybe damaged.D MICROPHONEThe supplied or optional microphone has a PTT switch and ahanger hook.• The following functions are available when the microphone is on oroff hook (depending on the setting):- Automatic scan starts when it is on hook.- Scan is cancelled when it is off hook.- Scan is paused when it is off hook.- Automatic priority channel selection is available when it is offhook.- Sets to ‘Inaudible’ condition (mute condition) when it is on hook.- Sets to ‘Audible’ condition (unmute condition) when it is off hook.11 PANEL DESCRIPTION