Icom iM304 Instruction Manual
Also see for IC-M304: Service manualInstruction manual
                                                | |
Contents
|
12DUALWATCH/TRI-WATCH5 DescriptionDualwatch monitors Channel 16 while you are receivingon another channel; Tri-watch monitors Channel 16 and thecall channel while receiving another channel. Dualwatch/Tri-watch are convenient for monitor Channel 16 when you areoperating on another channel. Operationq Select Dualwatch or Tri-watch in Set mode. (p. 29)w Select the desired channel.e Push and hold [DUAL] (CH/WX) for 1 sec. to start Dual-watch or Tri-watch.• “ ” blinks during Dualwatch; “ ” blinks during Tri-watch.• A beep tone sounds when a signal is received on Channel 16.r To cancel Dualwatch or Tri-watch, push [DUAL] (CH/WX).DUALWATCH/TRI-WATCH SIMULATION• If a signal is received on Channel 16, Dualwatch/Tri-watchpauses on Channel 16 until the signal disappears.• If a signal is received on the call channel during Tri-watch,Tri-watch becomes Dualwatch until the signal disappears.• To transmit on the selected channel during Dualwatch/Tri-watch, push and hold [PTT].Dualwatch Tri-watchCall channel [Example]: Operating Tri-watch on INT Channel 25Tri-watch starts.Signal is received on callchannel.Signal is received onChannel 16 takes priority.Tri-watch resumes afterthe signal disappears.Push and holdfor 1 sec. |
Related manuals for Icom IC-M304
manualsdatabase
Your AI-powered manual search engine