Icom iM87 Instruction Manual
Also see for IC-M87: Instruction manualInstruction manualInstruction manualInstruction manualInstruction manual
                                        | |
Contents
| 
■ Scan typesScanning is an efficient way to locate signals quickly over awide frequency range. The transceiver has priority scan andnormal scan.In addition, an auto scan function is available for standbyconvenience. (p. 18)Set the TAG channels (scanned channel) before scanning.Clear the TAG for unwanted channels which inconvenientlystop scanning, such as those for digital communications.Choose priority or normal scan in set mode. (p. 18)NORMAL SCANCH 01 CH 02CH 88CH 05 CH 04CH 03Normal scan, like priority scan, searches through all TAGchannels in sequence. However, unlike priority scan,Channel 16 is not checked unless Channel 16 is set as aTAG channel.PRIORITY SCANCH 88CH 01CH 16CH 02CH 05 CH 04CH 03Priority scan searches through all TAG channels in se-quence while monitoring Channel 16. When a signal isdetected on Channel 16, scan pauses until the signaldisappears; when a signal is detected on a channel otherthan Channel 16, scan becomes Dualwatch until the sig-nal disappears.135SCAN OPERATION |
Related manuals for Icom IC-M87
manualsdatabase
Your AI-powered manual search engine