IC Live Users Manual - Models ICL-R & IC215S-R6AssemblyIC Live is a building block system designed for easy trans-portation, setup and teardown. It provides for 6 systemconfigurations from two basic modules, the ICL-R arraymodule and the IC215S-R subwoofer.Setup couldn’t be easier. To create a stacked array fromtwo ICL-R modules:1. Stand the two column arrays side by side and removethe two joining bars and their short Quik Release pins fromthe modules.2. Place one of the modules on top of the other one. Notethat the top module should be turned upside down so thehorn sections of the two modules are together.3. Align the two modules and then remove the Quik Re-lease pin from the upper module’s rear cylinder to allow itsinner sleeve to drop down into the lower module’s rearcylinder.4. Then re-insert the Quik Release pin into the upper mod-ule’s cylinder to lock the inner sleeve in place.