Ideal Boilers CF3/100 Installation And Servicing Manual

Ideal Boilers CF3/100 Installation And Servicing Manual Manual pdf 11 page image

11Mexico Super CF 3/100, 3/125, 3/140 - Installation5 BOILER CASING REMOVALINSTALLATIONINSTALLATIONTo install the boiler the casing MUST be removed.1. Remove the flue cleanout cover.2. CF 3/100 & CF 3/140 only.Ensure that the baffles (if fitted) are fully inserted in the flueways.6 CHECKING THE FLUEWAY BAFFLES1. Lift off the lower front panel.2. Remove 2 screws and lift off the grille assembly.3. Remove the gas valve cover by removing the retainingscrew. Disconnect the electrical leads.4. Release the gas valve lead from the retaining clip.5. Remove the thermostat phial from the pocket as shown.6. Remove the 2 screws securing the control panel anddisengage the panel by lowering and pulling it forward.7. Remove the 2 screws securing the top panel to the side.8. Draw the top panel forward and lift it off the boiler.9. Remove the 2 screws securing LH side panel to the fluecollector and baseplate.10. Pull the panel forward, lifting it clear of the locating peg,and remove.11. Repeat steps 9 &10 to remove the RH panel.12. The boiler is held to the packaging base by 4 M6 hexhead screws. Remove the front screws, slacken therear screws and remove the boiler from the packagingbase.