Ideal-Standard Easybox Slim Series Installation Instructions Manual
                                            | |
Contents
| 
This installation instruction covers two main products types (both dual control):• Products with integral on/off flow control: A5877AA, A5878AA, A5958AA, & A5959AA.The temperature and the flow rate of the water can be adjusted using the two control handleson the valve. The outlet device is normally a shower.• Products with integral 3 function diverter: A5879AA & A5880AA.The temperature of the water can be adjusted with the lower control handle on the valve.The upper handle is used to diverter the mixed water to either a shower device, a bath filldevice or to switch off the water flow.4.0 Pre-installation notes:4.1 Overview of kits 1 & 2For built-in products the installation is normally carried out in two stages:During first-fix (kit-1) the valve-box is installed into the wall or panel.During second-fix (kit-2) the chromed trim is fitted, usually after finishing (tiling) the wall.4.2 Kit-1 mounting depth controlIMPORTANT: For trouble-free installation of these built-in products the depth controls shownmust be observed. Using a spirit level ensure valve-box is level in all 3 directions.The valve-box is marked with MIN & MAX depth settings, the finished wall (after tiling) should liebetween these markers as shownMAXMINMAXMINFinished wall or panelLines on valve.boxserve as trimming guidefor installing kit-2When calculating depth, considerthickness of plaster, tile adhesive,& tiles (if applicable).8 |
Related manuals for Ideal-Standard Easybox Slim A5877AA
manualsdatabase
Your AI-powered manual search engine