Idis DR-2100P Series Operation Manual

Also see for DR-2100P Series: Operation manual Quick guide

Idis DR-2100P Series Operation Manual Manual pdf 69 page image

Part 4 - Search69• One-Touch Clip Copy configures the storagerange automatically based on the storage drive'scapacity. If there is insufficient space availableon the selected storage device, you will only beable to Clip Copy an amount of data equaling theremaining space available on the storage device.• The maximum size limit on Clip Copy files is30GB. Clip Copying a segment that is more than2GB in size produces multiple files that are upto 2GB in size, each. The maximum size limit forOne-Touch Clip Copy files is 2GB.• Clip Copy files can be played back on Windowssystems. For more information, refer to the IDISCenter operation manual.• For USB flash memory devices, the NVR supportsthe FAT32 file format only.Do not disconnect the USB cable or power off theUSB device while USB Clip Copy is in progress.Doing so can cause the NVR to malfunction orcritically damage the external USB device's filesystem. You may be prompted with an errormessage when trying to back up on the device.If so, you will need to restart the NVR. If theUSB hard disk's file system has been damaged,restarting the NVR will not solve the problem and theaforementioned error message will continue to bedisplayed each time you attempt a backup. If this isthe case, you will need to format the HDD or use arecovery program to repair the damage to the drive'sfile system.PrintPrint the current image.While in Search Mode, select Pause to pauseplayback. Select Print from the Search menu to openup the Print Setup window.• Printer Model- File Printer: Saves the current frame to the USBstorage device as a .pdf file that can be printed onthe printer connected to a computer.• Paper Size: Select the desired paper size.• File name: Designate a name for the file.Event Log SearchSelect Search Mode > Event Log Search to bringup the Event Log Search window.• Select an event to display the recording made onthe selected time and date (paused state). Selectthe Play button in the middle of the screen to startplaying back the recording. Use the drop-downmenu above to load recordings from other cameras.• You can uncheck the First and Last options at thetop of the Event Log Search window and specify thesearch time frame manually.Select First for From and Last for To to select theentire recording from start to end.• If designating From or To settings manually, you willbe able to enable/disable the Check Time Overlapoption.If the system's clock has been changed and thedesignated From or To point exists at more thanone location, you will have to choose one. Only theevents that took place between the selected Fromand To points will be searched. If Check TimeOverlap has not been selected, events from theentire From and To range will be searched.