Idis DR-6216PS Quick Manual

Also see for DR-6216P-S: Operation manual Installation manual

Contents

Idis DR-6216PS Quick Manual Manual pdf 8 page image

8English- Mode: Select the scan mode.- Advanced Setup: If the camera is networked butnot scanned, use this setup. This setup allows you tochange the network setting of the NVR’s VIDEO INport which is camera’s network environment. Checkthe camera’s network setting first before you use thissetup. Make sure that this setting does not conflictwith the WAN setting. For more information on theWAN setting.1 Select Scan to commence scanning.2 Select a camera from the scan list and then select AddCamera. The Device Login window will appear.3 Enter a User ID and a Password for the selectedcamera.Camera View Buttons● ALIGNMENT Button: Realigns camera screensdisplayed on the video display area in the order of VideoIn port connections.● RESET Button: Refreshes the video display area andthe camera list.● TOOL Button: Displays netcwork camera toolwindow and changes the camera protocol.Camera List AreaFollowing options can be accessed by right-clicking on acamera list entry:● Add/Remove Camera: Adds or removes the selectedcamera. The Add Camera option is inactive if the camerahas already been added to the screen.● Authentication: Enter the necessary camera login info.This option is inactive for DirectIP™ cameras becausethey do not require logins.Video Display AreaLeft-click on the video display area to toggle between splitscreen and single screen modes.Drag the camera screens around to rearrange them.Apply/Cancel ButtonsWhile in Camera Registration mode, select Apply to registerall changes.Select Cancel to exit Camera Registration mode withoutapplying the changes.It is not possible to register a camera that has alreadybeen registered to a different NVR.Diagnosis ProcessWhen the camera is registered to the NVR, Self-diagnosisruns automatically for the new registered and changedcameras. If Self-diagnosis is processing, DiagnosisProcessing message will be displayed.If Self-diagnosis is failed, Diagnosis Requirementmessage will be displayed. In this case, you can run Self-diagnosis manually.LoginConfiguring the NVR's settings and accessing its searchingand other functions require an authorized user login.1 Bring up the Live menu and either press the Setupbutton on the remote control or click on (Log in)using the mouse.