5.Reversing the DoorThis refrigerator has the capability of either opening the door from the left or right side. Thisunit is delivered to you with the door opening from the left side. Should you desire toreverse the direction, please follow these instructions.Refer to the following illustration for assistance.Note: All removed parts must be saved for reinstallation ofthe door.1.Remove the upper hinge cap (1).2.Using a pry-tool, remove the plug buttons (5).3.Remove the two Phillips screws (2) that connect the upper hinge (3) on the right side of thecabinet top.4.Carefully lift the door and place it on a padded surface to prevent scratching.5.Remove the plug (9) and transfer it to the uncovered hole on the right side of the unit. Besure to press the button firmly into the hole.6.Remove the two bolts (7) that hold the lower hinge (4) on the right side of the unit.7.Remove the screw-type leveling front leg (8) and transfer it to the right side as shown inthe adjacent figure.8.Set the door into it's new place making sure the pin enters the bushing at the lower framesection (hole).9.Secure the upper hinge (3) previously removed in step 3 on the left side of the unit. Makesure the pin enters the bushing on the upper frame section (hole).10.Loosely secure the lower left hinge (4) and do not tighten the bolts until the door is in theclosed position and leveled.11.Insert the plug buttons (5) on the uncovered holes (right side).12.Replace the upper hinge cap (1).①⑨⑧⑦⑥⑤④③②PlugLeveling Front LegHinge Plug(Door Frame)Door Hinge BoltsShort LegLower Door HingeUpper Door HingeDoor hinge ScrewsDoor Hinge Cap①⑨⑧⑥⑤④③②⑦5