2518BExternal Remote Control140BConnecting GPI Port (RJ-45)Turning the monitor off is recommended before cable connection. Assignablefunctions are listed below.Function Name DescriptionSDI-1 Input Switches the input to SDI-1SDI-2 Input Switches the input to SDI-2HDMI Input Switches the input to HDMIYPbPr Input Switches the input to YPbPrCVBS-1 Input Switches the input to CVBS-1CVBS-2 Input Switches the input to CVBS-2CVBS-3 Input Switches the input to CVBS-3KEY-UP ▲ CURSOR UP on Menu Control.KEY-DOWN ▼ CURSOR DOWN on Menu Control.KEY- MENU Menu On/OffKEY-ENTER Enter ButtonAspect Aspect On/Off1:1 Scan On/Off 1:1 SCAN Function On/OffH/V Delay On/Off H/V Delay Function On/OffTC Display On/Off TC Display On/OffALM Display On/Off Audio Level Meters Display On/OffFreeze On/Off Freeze Frame On/OffFront Button LED On/Off Front Button LED On/Off.Tally Red On/Off Tally Red LED On/OffTally Green On/Off Tally Green LED On/Off141BBacklightSet the backlight intensity from 0 to 40. An LCD panel requires more than 30minutes before mfinal monitor calibration.142BFront Button LEDSet front LEDs on/off status.