Ikan VK7i Quick Start Manual

Contents

www.ikancorp.com 713-272-8822VK7i7” IPS LCD Monitor QUICKSTART GUIDEThe MANUAL function allows you to change the values of Red, Green, and Blue (RGB).This function recalls user defined values settings .The user setting will remain in memoryindefinitely and can be erased by using the reset option in the main menu.The DSLR Scaling function will allow users to extend their DSLR camera’s HDMI videooutput any option of four – Normal, 3:2, 16:9 or Full Screen – convenience made simple.This function displays the blanking portion of the incoming signal.The LCD panel in this display has a native display of 1280 x 800 pixels. A signal of anyother resolution is scaled to fit this native resolution. There may be time when it isdesired to view the incoming signal without scaling. Enabling Pixel to Pixel mode turnsoff the scaling and displays a 1024x600 pixel window of the original image. Each pixel ofthe panel displays one pixel of the original image. The user may use the arrow buttons(buttons 3-6) on the monitor face to move the window left, right, up and down to see thedesired portion of the image.The VK7i is equipped with Monochrome Peaking features which highlight the desiredfocus area in a bright, red outline. The operator adjusts the focus control until the redindicator outlines on the desired area are razor sharp, indicating optimal focus. For thebest results, be sure the subject is properly exposed.The False Color feature utilizes a full spectrum of assigned color indicators, ensuringflawless shot exposure. As the camera Iris is adjusted, the subject of the image willchange color based on specific brightness values indicating optimal exposure. Seeincluded chart for color assignments.As an additional tool associated with the VK7i’s False Color feature, ikan’s exclusiveAdjustable Under Exposure and Over Exposed Waning feature gives the operator fullcontrol of the VK7i False Color brightness values. By setting the preferred IRE exposurelimits, the operator is warned when the image exposure is exceeding or falling underthe preset IRE limit, providing customizable, full image exposure control.The VK7i offers adjustable upper Clip Guide levels to accurately display overexposedimages in any shooting condition. The operator simply assigns the upper IRE to theirpreference and any exposure over the set IRE limit will flash in a vivid purple, indicatingonly the over exposed area.This function displays a side by side comparison of the incoming video signal. Pushingthe F1/2 button one time will enter the mode. Each time the F1/2 button is pushed itwill freeze the current frame on the right hand side of the display while the left continuesto display the live signal. Pressing the exit button will exit the window mode. UseWindow 1 for 16:9 signals and Window 2 for 4:3 signals.Display a crosshair on the center of screen.Brightness 0-100Contrast 0-100Chroma 0-100Sharpness 0-100Tint 0-100Color Temp. 5600 K6500 K9300 KMANUALOSD Language EnglishChineseOSD Duration 5-60 secondLuma Under WarnLuma Over WarnFuction 1 Window 1Window 2HV DelayGuidesPeakingFalse ColorClip GuideUnderscanDSLR ScalingCheck FieldPixelFuction 2 Window 1Window 2HV DelayGuidesPeakingFalse ColorClip GuideUnderscanDSLR ScalingCheck FieldPixelMenu Setup User 1-5System ResetCONFIGURATION OF SETTING MENUSCrosshairCrosshair

/ 5

Related manuals for Ikan VK7i