Jäger Z45-D160.01 S5A Manual

Designated useItem no. 10301062, Revision 096 ( 36 )2.1.3 Documentation suppliedThe documents listed below are supplied with the HF spindle:q Manualq The declaration of incorporation is part of the manual.q Inspection protocolÜ Check that the documentation supplied is complete when the spindle isdelivered. If necessary, request a new copy.2.2 Packaging of HF spindleAll transport packaging materials can be recycled in appropriate disposal facil-ities.3 Designated useThe HF spindle is an “incomplete machine” in accordance with the MachineryDirective and cannot perform any function independently. The HF spindle canonly be operated in conjunction with a machine tool and a frequency con-verter.3.1 Permissible types of machiningThe HF spindle has been developed only for the following types of machining.q Cuttingq Drillingq Engravingq GrindingÜ Contact Nakanishi Jaeger GmbH if other types of machining are required.3.2 Permissible materialsThe HF spindle has been developed only for the following materials.q Metals (such as alloys, cast metals etc.)q Sintered materialsq Plasticsq Woodq Graphiteq Stone (marble, etc.)q Paper and cardboardq Circuit boardsq Glass and ceramicÜ Contact Nakanishi Jaeger GmbH if other materials are to be machined.