Jäger Z62-K360.12 S4AM Manual

Transport and packagingItem no. 10403107, Revision 126 ( 40 )2 Transport and packagingAvoid strong vibrations or impacts during transportation, as these could dam-age the ball bearings of the HF spindle.Ü Any damage reduces the accuracy of the HF spindle.Ü Any damage restricts the functionality of the HF spindle.Ü Any damage shortens the service life of the HF spindle.2.1 Scope of supply of HF spindleThe following parts are supplied with the HF spindle:q High Frequency Spindleq Tool taperq Service setq C-wrenchq Transport packagingÜ Check the high frequency spindle for completeness upon delivery.2.1.1 Service setq Felt cleaning taperq Collet grease2.1.2 Optional accessoriesAvailable on request:q Spindle holderq Frequency converterq Chillerq Colletq Further accessories on request.Only approved accessories have been tested for operational safety and func-tionality.Ü Do not use any other accessories – this may invalidate any warranty claimsand compensation claims for damages.Ü If the spindle holder is to be produced in-house, it is essential to contactNakanishi Jaeger GmbH before starting production to request the toler-ances and production plan for the spindle holder.