Jäger Z80-H530.08 S8VW3 Manual

Technical SpecificationsItem no. 10405047-02, Revision 04 25 ( 48 )6.7 Speed and position sensor (MiniCoder)Example of design: toothed wheelThe MiniCoder scans a target wheel (toothed wheel) made from ferromag-netic material. The magnetic field of the built-in encoder is modulated by themoving target wheel.q The sensor detects the change in magnetic field and converts this into a si-nusoidal output signal.6.7.1 Technical SpecificationsOutput level 1 VSS as differential signalOutput signal2 sinusoidal signals offset by 90°and their inverse signals;short-circuit-proof;Option: reference pulseOutput frequency 0 … 200 kHzfor a line capacity of 5 nFOffset (static) ± 20 mVAmplitude tolerance -20% … +10%Amplitude synchronization USp1/USp2 0.9 … 1.1Supply voltage UB 5 VDC ±5%Power consumption without load ≤ 0.3 WCable length max. 100 m(note voltage drop via supply line)Connection9-core cable Core cross-section: 0.15 mm²Outer diameter: 5 -0.3 mm,min. bending radius: 25 mmadditionally routed shielded cable for grounding near to sensor