USB DISPLAY ADAPTER USER MANUAL53REGULATORY COMPLIANCEFCCThis equipment has been tested and found to comply with FCC Part 15 Subpart B § 15.109/15.107 ClassB.Operation is subject to the following two conditions:• This device may not cause harmful interference• This device must accept any interference, including interference that may cause undesired operationof the device.CEThis equipment is in compliance with the requirements of the following regulations:EN 55022 Class B (2006),EN 55024 (1998+A1:2001+ A2:2003), (IEC/EN 61000-4-2 (1995+A1:1998+A2:2001)/-3(2006)C-TickThis equipment is in compliance with the requirements of the following regulations:EN 55022 (2006) Class B, AS/NZS CISPR22 © IEC: 2005.VCCIThis equipment is in compliance with the requirements of the following regulations:CISPR22 © IEC: 2005DisclaimerInformation in this document is subject to change without notice. The manufacturer does not make anyrepresentations or warranties (implied or otherwise) regarding the accuracy and completeness of thisdocument and shall in no event be liable for any loss of profit or any commercial damage, includingbut not limited to special, incidental, consequential, or other damage. No part of this document maybe reproduced or transmitted in any form by any means, electronic or mechanical, includingphotocopying, recording or information recording and retrieval systems without the expressed writtenpermission of the manufacturer.