JAI EL-2800M-USB User Manual
                                                                         | |
Contents
| 
EL-2800M-USB / EL-2800C-USB- 42 -7.3.3 Trigger OverlapThis function defines whether or not a trigger pulse can be accepted while data is being read out.OFF： The trigger pulse is not accepted during CCD readout.Read Out： The trigger pulse can be accepted during CCD readout7.4. Normal continuous operation (Timed Exposure Mode/Trigger Mode OFF)This is used for applications which do not require triggering. In this mode, the video signal for theauto-iris lens is available.Primary settings to use this modeTrigger controlTrigger Mode: OFFTable - 20 Minimum interval of the image (8-bit)Readout modeFULL 2/3 AOI 1/2 AOI 1/4 AOI 1/8 AOI1/2VBinning(Note1)Minimum frame lines 745 565 475 340 273 376Note 1) Only for EL-2800M-USB7.5. Timed mode (EPS)This mode allows a single image frame to be captured with a preset exposure time by using theexternal trigger. Additional settings determine if the trigger pulse can be accepted during theexposure period.Primary settings to use this modeExposure mode: TimedTrigger mode: ONFrame Start: ONTable - 21 Minimum interval of the trigger pulse (Sensor Tap Geometry: 1X2 – 2YE)Readout modeFULL 2/3 AOI 1/2 AOI 1/4 AOI 1/8 AOI1/2VBinning(Note1)Minimum intervallines 746 566 476 341 274 377Note 1) EL-2800M onlyNote 2) This table shows in case of Trigger overlap being set to Readout. If Triggeroverlap is set to OFF, this period is longer than the figures in this table. |
Related manuals for JAI EL-2800C-USB
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine