JAR Systems PB-80C24 User Manual

Also see for PB-80C24: Instructions User manual

Contents

basic functions

JAR Systems PB-80C24 User Manual Manual pdf 4 page image

Basic FunctionsCharge ModePressing the CHARGE button will start charge mode. Charging willautomatically stop when all batteries are 100% charged. You can alsostop charging at any time by pressing the CHARGE button a secondtime. This is best used when all devices are powered down and returnedto the cart at the same time.Manage ModePressing the MANAGE button will start manage mode and turn on theauxiliary power. This mode will continuously monitor and distributepower until manually stopped. This mode is best used if some of thedevices may be left on when connected or if devices are connected atdifferent times. Press the manage button again to stop manage mode.Auxiliary PowerControls power to any peripherals that are connected to theAUX power outlet in the back of the charger. If the AUX devicesmust be operational during charging then the system must be inmanage mode. Be aware that this may lengthen charging time.Charging Status LED IndicatorsCorresponds to the four charging outlets and indicates which sectionsare active. The system controls this automatically. As few as one andas many as all four sections may be active at once. When all fourLEDs are solid green, charging is complete.Power IconIndicates when the system is connected to power and is ready.Internal Circuit BreakerThe Intelligent Charging System is protected with its own circuitbreaker. If it encounters misuse such as plugging in unsupporteddevices or if there is a power surge, the breaker will trip and thereset button will pop out. To reset the system, simply press it backin. Please ensure that everything is plugged in properly and that onlysupported devices are connected before resetting.0–59% 60–89% 90–100%