18PART NUMBER DESCRIPTIONLSR708P SALES MODEL, LSR708P12A ABC CD D34567812345678BTHESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF HARMAN.DO NOT DISCLOSE, REPRODUCE OR PUBLISH WITHOUT WRITTENHARMAN APPROVALTITLESIZE REVOFSHEETSCALE:DRAWING NO.DIMENSIONS SHOWN ARE FOR REFERENCEAND INSPECTION ONLY.REFER TO 3D MODEL PROVIDED WITH THISDRAWING FOR OVERALL DEFINITION OFPART GEOMETRY.D 1:4 1 51000248160HARMAN 8500 Balboa BlvdNorthridge, CA 91329USAS/M, LSR708PTOLERANCES UNLESS OTHERWISE SPECIFIEDINCHES0.XXX 0.005"0.XX 0.01"0.X 0.02"FRACTIONNAL 1/32DRAWN BYDESIGNED BYENGINEERDATEDATE3/1/20169/10/2014ANGULAR: 0.5BREAK ALL SHARP EDGESXXX INSPECTION DIMENSIONROHSRESTRICTION OF HAZARDOUS SUBSTANCESALL MATERIALS USED IN THIS PART MUST BEROHS COMPLIANTSUPPLIER SHALL PROVIDE A CERTIFICATE OFROHS COMPLIANT WITH THE FIRST ARTICLETHIRD ANGLE PROJECTIONM. NIETOM. NIETOM. NIETODJBL ProfessionalMILLIMETERS0.XXX 0.1mm0.XX 0.2 mm0.X 0.5 mm9.85±.03AFTER FINISH12.30±.03AFTER FINISH4X 2.454X 4.254X 2.004X 1.0017.35±.03AFTER FINISHNOTES:MOUNTING POINTS: 8XM8 - MAXIMUM CLEARANCE IN ENCLOSURE IS 3/4 IN (19MM).USE DNL Y LOAD-RATED FASTENERS. RECOMMENDED FASTENER LENGTH:LESS THAN OR EQUAL TO 3/4 IN (19MM) IN LENGTH PLUS THICKNESS OF MOUNTING PLATE