JBL Authentics L16 Owner's Manual

Also see for Authentics L 16: Instruction manual Setup guide Quick start guide

Contents

JBL Authentics L16 Owner's Manual Manual pdf 9 page image

Operation9authentics l167. JBl authentics will then attempt to connect toyour wi-Fi network (the led shall flash during theconnection process).Once connected successfully, the led will stopflashing and an audio tone will be heard.you can connect your computer or phone/tablet to the samewi-Fi network as authentics and enjoy your music wirelessly.OperationTurning the JBL Authentics L16 ON and OFFto turn the JBl authentics l16 On, press the power buttonon the top panel of the system.to put the system into standby mode, again press the powerbutton.NOTE: You can toggle between the Standby and theOperational modes by pressing the Power button.Adjusting the System’s Volumerotate the Volume tuner on the panel of the system clockwiseto increase and counter-clockwise to decrease the volume.the white leds around the Volume tuner indicate the volumelevel of the audio system. the system has 40 steps and 12 isthe default volume level. all the voice prompts will be playedat the default level.NOTE: When the system goes into Operational modefrom Standby, the volume set during the Operationalmode before it went to Standby becomes the defaultvolume level.IMPORTANT: The lowest setting of the volume tunerwill mute the system.Muting the Systemto mute the JBl authentics system:• set the volume to level 0 by rotating the Volume tunercounterclockwise.NOTE: There are no other means to mute the audiosystem.Switching Sourcespress the JBl authentics l16 source button for up to twoseconds to cycle between the sources in the followingsequence:1. airplay2. dlna3. Bluetooth4. aux Input5. phono6. digital Opticalthe system can play only one active source at a time. pressthe source button whenever you want to change the source.the system has an auto-switch function to switch sourcesautomatically. If you attempt to connect to another sourcewhile the system is in operational mode with one source, thesystem stops or pauses the audio from the last source.