JBL Bar 5.1 Surround Owner's Manual

Also see for Bar 5.1 Surround: Owner's manual Quick start guide

Contents

102. Follow the Step 3 under “Connect a Bluetooth device”.• If the device has ever been paired with the soundbar, firstunpair “ ” on the device.NOTES:− The Bluetooth connection will be lost if the distance between thesoundbar and Bluetooth device exceeds 33 ft (10 m).− Electronic devices may cause radio interference. Devices that generateelectromagnetic waves must be kept away from the Soundbar, suchas microwaves and wireless LAN devices.6. PLAY6.1 Power-on/Auto standby/Auto wakeupPOWER2 13 HELLOPOWER2 1Switch on1. Connect the soundbar and subwoofer to power by using thesupplied power cords.→ The screen on the soundbar shows “ ” and then, “”.2. On the soundbar, press to switch on.→ “ ” is displayed.→ The subwoofer is connected to the soundbar automatically.Connected: turns solid white.NOTES:− Use the supplied power cords only.− Before connecting to power, make sure that you have properly pluggedthe power cords into the soundbar and subwoofer.− Before switching on the soundbar, make sure that you have completedall other connections (See “TV connection” and “Digital deviceconnection” in the “Connect” chapter).Auto standbyIf the soundbar is inactive for more than 10 minutes, it will switchto standby mode automatically. “ ” is displayed. Thesubwoofer also goes to standby, and turns solid amber.Next time you switch on the soundbar, it returns to the lastselected source.Auto wakeupIn standby mode, the soundbar will wake up automatically when• the soundbar is connected to your TV through the HDMIARC connection and your TV is switched on;