www.jbl.comEnglish7BLUETOOTH OPERATIONTo wirelessly stream audio to the soundbar from a Bluetooth-enableddevice:1. Confirm that the soundbar is in the Bluetooth pairing mode (theBluetooth button LED will be flashing blue). If the LED is not flashingblue, press and hold the Bluetooth button until its LED begins toflash blue.HDMI3HDMI2HDMI1HDMI TVBluetooth Button2. Place the device in the pairing mode. Use the device’s Bluetoothpairing menu to pair it with the soundbar. (The soundbar will appearas “SB400” in the device’s menu.) If the device requires a passcode,use 0000.3. When the soundbar’s Bluetooth button LED illuminates constantly,it is paired with the device and you can stream audio via Bluetoothfrom the device to the soundbar.To listen to audio from the Bluetooth device, press the Source buttonrepeatedly until the Bluetooth Source Indicator LED illuminates (seeSwitching Sources, below).To disconnect the Bluetooth device, press and hold the soundbar’sBluetooth button until the LED begins flashing. To pair the soundbarwith a different Bluetooth-enabled device, repeat Steps 1 – 3 with thenew device.Notes on Bluetooth operation:• You can manually switch sources to the paired Bluetooth device bypressing the soundbar’s Bluetooth button.• If you switch the soundbar to a different source while a pairedBluetooth device is streaming to the soundbar, the soundbar willsend a Stop command and the Bluetooth device will stop streaming.SWITCHING SOURCESPress the soundbar’s Source button to cycle between the sources inthe following order: Bluetooth, Aux, Optical, HDMI TV, HDMI 1, HDMI 2,HDMI 3, Bluetooth, etc. (The remote has an individual selector buttonfor each source except Bluetooth.) The active source’s Source IndicatorLED will illuminate.HDMI TV HDMI1 HDMI2 HDMI3OPTICALAUX INBLUETOOTHSource ButtonSourceButtonsADJUSTING THE SYSTEM’S VOLUMEPress the soundbar’s or remote’s Volume + and – buttons to raise andlower the system’s volume one step at a time. Hold down the buttonsto continuously raise or lower the volume.HDMI TV HDMI1 HDMI2 HDMI3OPTICALAUX INBLUETOOTHVolume Buttons Volume ButtonsFor the best sound, we recommend turning your TV’s built-in speakersoff. Consult your TV’s owner’s manual to find out how to do this.MUTING THE SYSTEMMomentarily press both of the soundbar’s Volume buttons at the sametime, or press the remote’s Mute button to mute the system. (BothVolume indicators illuminate and the OSD displays the Mute icon.)Momentarily press either of the soundbar’s Volume buttons or pressthe remote’s Mute button again to un-mute the system. (The Volumeindicators turn off.)HDMI TV HDMI1 HDMI2 HDMI3OPTICALAUX INBLUETOOTHBoth Volume Buttons MuteButtonCHANGING THE SURROUND MODEPress the soundbar’s or remote’s Surround Mode indicator to switchthe sound between normal stereo (the Surround Mode indicator lightswhite and the OSD displays “Music” as the sound mode) and HARMANDisplay Surround (the Surround Mode indicator lights amber and the OSDdisplays “Movie” as the sound mode). The HARMAN Display Surroundsetting will produce a complete surround-sound experience for anyonesitting in front of and several feet away from the soundbar. Although it isparticularly effective when watching movies, you can also try the HARMANDisplay Surround setting for music.HDMI TV HDMI1 HDMI2 HDMI3OPTICALAUX INBLUETOOTHSurround ButtonSurroundButton