2uNPACkiNg ThE sYsTEMCarefully unpack the system. If you suspect damage from transit,report it immediately to your dealer and/or delivery service. Keepthe shipping carton and packing materials for future use. Open thepackage and verify the following contents:Included2 JBL Control One AW speakers2 x wall-mount, rotatable brackets(includes bar wrench and backup cords)1 x Owner’s ManualPLACiNg ThE sPEAkERsDetermine where to place the speakers. The following figures showtwo possible applications.Application 1: Adding surround speakers to a home theater system.LeftSurroundChannelRightSurroundChannelLeft FrontChannelSubwooferRight FrontChannelCenterChannelCouchApplication 2: Adding speakers to remote locations in your home.Left RearChannelRight RearChannelCenter RearChannelLeft FrontChannelRight FrontChannel45 oCONNECTiNg ThE sPEAkERsConnect the speaker wire (included) to the push terminals on therear of the speaker (10). Please note that the speaker wire suppliedfeatures a polarity stripe to help distinguish its two conductors. Usethis polarity stripe to ensure that you are connecting the positive (+)terminal on the JBL Control One AW speakers to the positive (+)terminal on the amplifier, and the negative (-) speaker terminal to thenegative (-) speaker terminal. It does not matter whether you usethe striped conductor for connecting the postive (+) terminals or thenegative (-) terminals.+–10WALL ANd sTANd PLACEMENTAdjustable wall brackets are included for the JBL Control One AWspeakers. The included brackets are for wall-mounting only.Ceiling-mounting of the JBL Control One AW speakers is notrecommended, regardless of the bracket used.Wall-MountIng the SpeakerS uSIng Included WallBracketSIMportant SaFetY note: proper selection of mountinghardware not included herein, and proper assembly andinstallation of brackets, including, but not limited to, selectionof appropriate weight-bearing support and bracket use withthe specified speaker only is the exclusive responsibility of thecustomer. Manufacturer disclaims any liability for the selectionof mounting hardware and/or bracket installation.