JBL CSB6 Owner's Manual

Contents

6WALL-MOUNtINg thE CSC56 AND CSB6The CSC56 center channel and the CSB6 are designed to be mounted on the wall. There are two (2) fixed-mount wallbrackets provided for the CSC56, and one for the CSB6. Each speaker bracket will require up to three 1-1/2" #10wood screws; each screw should be fastened to a wall stud. If a wall stud is unavailable, install an anchor appropriatefor a 1-1/2" #10 screw.NOTE: The customer is responsible for the correct selection and use of mounting hardware (available through hardwarestores) to ensure the proper and safe wall-mounting of the speakers.Step 1: Using the included mounting template (CSC56 only) or the bracket back plate (CSB6 only), mark the positionson the wall where you would like to place the mounting screws.Step 2: Attach the back plate(s) of the brackets to the wall using three screws (not included).Step 3: Attach the front plate(s) (with the two holes) of the bracket(s) to the CSC56 or CSB6, using the providedscrews.Step 4: Slide the CSC56 or CSB6 speaker with the attached bracket front plate(s) onto the back plate(s) of thebracket(s). Once positioned properly, the speaker should slide down slightly and become secure.To remove the speaker from the wall, simply slide the speaker up.CSC56CSB6NOTE: Remove the baseof the CSB6 by removingthe two screws on thebottom of the speaker.