JBL Cinema SB350 Quick Start Manual

Also see for Cinema SB350: Owner's manual Quick start guide

Contents

CZJ Stereo I Harman Display SurroundLEDbehaviorStereo modeHarman DisplaySurround•..-------------------·...(f)(_____________... __________)@ Remote learning featureThe soundbar has the ability to learn the volume control and power infrared (IR) codes of your IRlV remote control.To program the soundbar to respond to your lV remote control:1. Press and hold the top panel 'Surround' key until the system enters learning mode(the LED will blink orange).2. VOLUME+: Press 'Volume+' on the soundbar and then press 'Volume+' on the lVremote control.3. VOLUME - : Press 'Volume -' on the soundbar and then press 'Volume-' on the lVremote control.4. MUTE: Press 'Volume+' and 'Volume-' together on the soundbar and then press 'Mute 'on the lV remote control.5. POWER: Power On your soundbar by pressing the 'Power' key on the soundbar and thenpressing the 'Power' key on the lV remote cont rol.Note: After each lV IR code is programmed, the blinking orange LED will turn white for1 second. The soundbar is ready to learn the next key after the white LED disappears and theorange LED begins to blink.Pre ss and hold the top panei'Surround ' key again to exit learning mode (the orange LED willst op blinking).®• Frequen cy response: 45Hz - 20kHz• Maximum SPL: 1OOdB• JBL Cinema SB350 includes two-way, dual driver left and right speaker modules,each with two 55mm (2.25") full range drivers and a 32mm (1.25") dome tweeter.• Wireless, powered subwoofer with a 165mm (6.5") driver in a ported enclosure• Total Cinema SB350 amplifier power: 320W max• Dolb~ Digital Decoding• One HDMI ~t output with Audio Return Channel (ARC)• Bluetooth®con nectivity• One stereo analog-audio input• One optical digital input• One USB port for software update• Dimensions : Soundbar (L x W x H): 39.4" x 2.4 • x 3.1" (1 000 x 62 x 78mm)Weight: 7.31b (3.3kg)Subwoofer (LX W X H) : 9.5" X 9.5" X 12.6" (242 X 242 X 320mm)Weight: 10.61b (4 .8kg)