JBL Control 1 Pro Product User Manual

Also see for Control 1 Pro: User guide Specifications

Contents

rotating the logo

If there is no sound from your speakers:• Make sure your power amplifier is on and the gain is set above its minimum setting.• Make sure there is a signal to your amplifier from your mixer.• Ensure all wires are connected and that none are cut or frayed.• If more than one pair of speakers is being used, check the minimum impedancerequirments of your amplifier (overloading your amplifier can result in damage toyour amp).If there is no sound from one of your speakers:• Check the balance control on your mixer.• Check the channel output gains of your amplifier.• Ensure all wires are connected and that none are cut or frayed.If there is no (or weak) bass output or a poor stereo image:• Make sure the polarities (+ and -) of the speakers inputs are properly connected.C) Mount the wall bracket plate (4) onto a flat sturdy surface using theappropriate mounting hardware for the surface. A safety cable (5) (notincluded) may be attached to the wall bracket via its eyelet (6) at one of thetwo lower screw mounting points or to a secondary point off the mounting plate.D) Next, slip the large molded nut (7) over the ball on the metal rod/ball assembly (1).E) Holding the cabinet (8) with both hands, insert the ball on the metal rod/ballassembly (1) into the cup of the wall plate (4).F) Orient the speaker into the desired position and hand tighten the molded nut(7). Once the orientation is finalized, use the metal bar (9) in one of the holeson the molded nut (7) to securely tighten.G) Finally, clip the safety cable to the cabinet’s safety bar (10) on the back of thecabinet.The Control 1 Pro’s logo can be oriented for display at 90° increments. To rotate thelogo, first gently pry the grille and gasket from the cabinet. Next, push-in the logo’sfastener (found on the underside of the grille) and rotate the logo to the desiredposition.Rotating the LogoTroubleshootingJBL Professional 3

/ 4

Related manuals for JBL Control 1 Pro