JBL EON 510 User Manual

Also see for EON 510: User guide Instructions User guide User manual Technical manual

11EON510 SpecificationsSystem Type: Self powered 10", two-way, bass-reflex designFrequency Range (-10 dB): 58 Hz - 18.5 kHz (EQ in ‘Flat’ position)Frequency Response (±3 dB): 70 Hz - 17 kHz (EQ in ‘Flat’ position)Coverage Pattern: 100º x 60º nominalDirectivity Index (DI): 9 dBDirectivity Factor (Q): 8Crossover Frequency: 1.6 kHzSystem Power Rating 280 W continuous, 560 W peakLF Power amp 220 W continuous at driver impedanceHF Power amp 60 W continuous at driver impedanceDistortion: Less than 0.1% at rated powerMaximum SPL: 121 dBSignal indicators:Limit: Red LED indicates input overload conditionSignal: Green LED indicates signal presentMic/Line: Red LED indicatorInput Gain (input 3): Mic position: -infinity to +40 dBLine position: -infinity to +4 dB (+20 dBu Max signal input)Input Gain (input 1 & 2): -Infinity to +4 dB (+20 dBu Max signal input)Input Impedance: 64 K Ohms (balanced), 32 K Ohms (unbalanced)Boost EQ: LF +3 dB Shelving Filter @ 150HF +2.5 dB Shelving Filter @ 4 kHzLow Cut Filter Preset high pass @ 120 HzLF Driver: 1 x JBL 261F 254 mm (10 in) Differential Drive® integrated woofer with dual 1.5” voice coils.HF Driver: 1 x JBL 2414H-1 25.4 mm (1 in) neodymium compression driverInput 3 connector: Balanced XLR / ¼ inch TRS combo jack with XLR loop throughInput 1 & 2 connectors: Balanced ¼ inch TRS jackOutput (Loop/Mix switch): Balanced male XLR, +20 dBu (peak) o/p level in MIX positionXLR Pin Assignments: Pin 2(+), Pin 3(-), Pin 1(GND)Limiting/Protection: Dynamic LimiterEnclosure: PP impact copolymer, multi-purpose main & monitor orientationHandles: One on top with rubber gripSuspension/Mounting: 36 mm pole socket with stabilizing screw, 3 x M10 suspension points, 1 x M10 pull-back pointGrille: Powder coated perforated steel with acoustically transparent black screen backing.AC input: 120-240 v, 50/60 HzDimensions (H x W x D): 490 x 315 x 262 mm (19.3 in x 12.3 in x 10.3 in)Net Weight: 7.7 kg (17 lb)Block DiagramMICSIGNALLEVEL 1 & 2INPUT 3OUTLOOPMIXINPUT 1 & 2BOOSTEQHPFLEVEL 3LFHFSUMLINEMIC LPFFLATCUTLIMITSUM