5DECLARATION OF CONFORMITYSafety And EMC Compliance SpecificationsEN 55103-1:1997 Electromagnetic Compatibility - Product Family Standard for Audio, Video, Audio-Visual and Entertainment Lighting ControlApparatus for Professional Use, Part 1: EmissionsEN 55103-1:1997 Magnetic Field Emissions-Annex A@ 10 cm and 20 cmEN 55022:2003 Limits and Methods of Measurement of Radio Disturbance Characteristics of ITE: Radiated, Class B Limits; Conducted, Class AEN 55103-2:1997 Electromagnetic Compatibility - Product Family Standard for Audio, Video, Audio-Visual and Entertainment Lighting ControlApparatus for Professional Use, Part 2: ImmunityEN 61000-4-2: A2:2001 Electrostatic Discharge Immunity (Environment E2-criteria B, 4 kV Contact, 8 kV Air discharge)EN 61000-4-3:2003 Radiated, Radio-frequency, Electromagnetic Immunity (Environment E2, criteria A)EN61000-4-4:2005 Electrical Fast Transient/Burst Immunity (criteria B)EN 61000-4-5:2001 Surge Immunity (criteria B)EN 61000-4-6:1996 Immunity to Conducted Disturbances Induced by Radio-Frequency Fields (criteria A)EN 61000-4-11:2004 Voltage Dips, Short Interruptions and Voltage VariationUL 6500 2nd Edition 1999 Audio/Video and Musical Instruments Apparatus for Household, Commercial, and Similar General UseIEC 60065_2001 / EN 60065_2002 + A1:2006 + A11:2008UL Compliance SpecificationsUL 60065 7th Ed. CAN/CSA 22.2 No.60065_2003FCC Statement IC Warning1. This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received,including interference that may cause undesired operation.2. Changes or modifications not expressly approved by the partyresponsible for compliance could void the user’s authority tooperate the equipment.NOTE: This equipment has been tested and found to complywith the limits for a Class B digital device, pursuant to Part 15 ofthe FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequencyenergy and, if not installed and used in accordance withthe instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of thefollowing measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.FCC Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth foran uncontrolled environment. This equipment should be installed andoperated with minimum distance 20cm between the radiator & your body1. This device complies with Industry Canada licence-exempt RSSstandard(s). Operation is subject to the following two conditions:(1) this device may not cause interference, and(2) this device must accept any interference, including interferencethat may cause undesired operation of the device.2. Changes or modifications not expressly approved by the partyresponsible for compliance could void the user’s authority to operatethe equipment.Le présent appareil est conforme aux CNR d’Industrie Canada applicablesaux appareils radio exempts de licence. L’exploitation est autorisée auxdeux conditions suivantes :(1) l’appareil ne doit pas produire de brouillage, et(2) l’utilisateur de l’appareil doit accepter tout brouillageradioélectrique subi, même si le brouillage est susceptible d’encompromettre le fonctionnement.”