1004 - Reset PasswordSTEPS:1. Switch off the power.2. Press down both the MIC and the ECHObuttons on the front panel.3. Switch on the power.4. Release both buttons when the LCDscreen displays as shown.5. Choose NO or YES using the adjacentADJUST/SELECT knob.6. Press the knod.NOTE:1. When NO is selected, password in current usewill not be reset;2. When YES is selected, password will be reset to123456.

Download GUI

Login GUI

change password

Reset Password

block diagram

Change MIC Settings

Change ECHO Settings

Device Setting

Preset Store Configuration

Short-cuts for EQ Setting

Select Speaker Models

Edit & Save Mic Built-in Parameters

Edit & Save Speaker Built-in Parameters

Upgrade Firmware

Remote Control through VOD Player

Set Mic Volume

JBL KX200 Quick Start Manual

important safety information

safety instructions

Section 2 - Getting Started

The Adjust/Select Knob

The ESC Button

Function Menus & Navigation

Section 3 - Processing & Parameters

ECHO

REVERB

Sing Mode & Dance Mode

Additional Parameters

function select

KX200