JBL PRX500 Series User Manual

Also see for PRX500 Series: User guide

Contents

11SYSTEM SPECIFICATIONSSystem Type: Self powered 12", two-way, bass-reflexFrequency Range (-10 dB): 46Hz - 20kHz (EQ in main position)60Hz - 20kHz (EQ in monitor position)Frequency Response (±3 dB): 76Hz - 20kHz (EQ in main position)90Hz - 20kHz (EQ in monitor position)Coverage Pattern: 70º x 70º nominalDirectivity Index (DI): 10.2 dBDirectivity Factor (Q): 10.8Crossover Modes: DSP controlled 48dB filter slopeCrossover Frequency: 1.6kHzSystem Power Rating: 500 W continuous, 1000W peakLF Power amp: Class-D, 400 Watt (continuous) at driver impedanceHF Power amp: Class-D, 100 Watt (continuous) at driver impedanceDistortion: Less than 0.1% at rated powerMaximum Peak Output: 133dB SPL 1Signal indicators: Overload: Red LED indicates input overload conditionSignal: Green LED indicates signal presentInput sensitivity: Mic position: -25 dBu to 0 dBuLine position: +28 dBu to +10 dBuInput Impedance: 64 K Ohms (balanced), 32 K Ohms (unbalanced)EQ: Presets for use in Main and Monitor positionLF Driver: 1 x JBL 262F 380 mm (12 in) Differential Drive ® wooferHF Driver: 1 x JBL 2408H 37.5 mm (1.5 in) annular polymer diaphragm,neodymium compression driverEnclosure: Trapezoidal, 18 mm, plywoodSuspension / Mounting: Dual 36mm pole socketTransport: Integrated handle with backing cupFinish: Anthracite DuraFlex™ finishGrille: Powder coated, Anthracite, 18 gauge perforated steelwith acoustical transparent black foam backing.Input Connectors: Balanced XLR / 1/4 inch combo jack with XLR loop through,Dimensions (H x W x D): 650 mm x 380 mm x 350 mm(25.5 in x 15 in x 14 in)Net Weight: 18 kg (40 lb.)PRX512M1 Maximum Peak output measured with IEC pink noise at 1 meter in front of speaker baffle under free space conditions. Measurement instrumentset to peak hold. Speaker muted and released at full power, recording maximum peak level.