JBL PRX600 series User Manual

Contents

5The PRX600 series speakers covered by this manual are not intended for use in highmoisture environments. Moisture can damage the speaker cone and surround and causecorrosion of electrical contacts and metal parts. Avoid exposing the speakers to directmoisture. Keep speakers out of extended or intense direct sunlight. The driver suspension willprematurely dry out and finished surfaces may be degraded by long-term exposure to intenseultra-violet (UV) light. PRX600 series speakers can generate considerable energy. Whenplaced on a slippery surface such as polished wood or linoleum, the speaker may move due to its acousticalenergy output. Precautions should be taken to assure that the speaker does not fall off a stage or table on whichit is placed.Stand Mounting Safety PrecautionsSome PRX600 series models include a 36 mm receptacle cup to allow mounting on tripod stands or on a poleover subwoofers. When using stands or poles, be sure to observe the following precautions:• Check the stand or pole specification to be certain the device is designed to support the weight of thespeaker. Observe all safety precautions specified by the manufacturer.• Always verify that the stand (or subwoofer/pole) is placed on a flat, level and stable surface and besure to fully extend the legs of tripod type stands. Position the stand so that the legs do not present atrip hazard.• Route cables so that performers, production crew, and audience will not trip and topple the speakers over.• Inspect the stand (or pole and associated hardware) before each use and do not use equipment withworn, damaged or missing parts.• Do not attempt to place more than one PRX600 series speaker on a stand or pole.• Always be cautious in windy, outdoor conditions. It may be necessary to place additional weight (i.e.sandbags) on the base of the stand to improve stability. Avoid attaching banners or similar items to anypart of a speaker system. Such attachments could act as a sail and topple the system.• Unless you are confident that you can handle the weight of the speaker, ask another person to helpyou get it onto the tripod stand or pole.• The PRX635 should be pole-mounted on a PRX 600 subwoofer using a pole no longer than 24” inlength. (SS3-BK24 or SS4-BK24)• JBL highly recommends that no more than 70 lbs of weight be placed on a speaker pole that ismounted to a PRX618S or PRX618S-XLF.Suspension of Loudspeaker SystemBefore attempting to suspend your JBL loudspeakers, read and understand the following safety information.IMPORTANT SAFETY WARNING!The information in this section has been assembled from recognized engineering data and is intended forinformational purposes only. None of the information in this section should be used without first obtainingcompetent advice with respect to applicability to a given circumstance. None of the information presented hereinis intended as a representation or warranty on the part of JBL. Anyone making use of this information assumesall liability arising from such use. All information presented herein is based upon materials and practices commonto North America and may not directly apply to other countries because of differing material dimensions,specifications, and/or local regulations. Users in other countries should consult with appropriate engineering andregulatory authorities for specific guidelines. Correct use of all rigging hardware is required for secure systemsuspension. Careful calculations should always be performed to ensure that all components are used within theirworking load limits before the array is suspended. Never exceed the maximum recommended load ratings.Before suspending any speaker system always inspect all components (enclosure, rigging frames, pins,eyebolts, track fittings, etc.) for cracks, deformations, corrosion, missing, loose or damaged parts that couldreduce strength and safety of the array. Do not suspend the speaker until the proper corrective action has beentaken. Use only load-rated hardware when suspending JBL suspendable loudspeaker models.PRECAUTIONS