JBL Performance Specialist SS6 Owner's Manual
Also see for Performance Specialist SS6: Brochure
        | |
5SS6, SS8, SSLCREXISTING CONSTRUCTIONRemove the grille from thespeaker frame by pulling on thepaper tab. If the tab is missing,to avoid scratching the grille orbaffle you may unfold a paperclip, insert the straight endthrough one of the holes in thegrille, and gently pull up.Determine the correct speakerlocation.Note: Remove the inner tem-plate, which is the paint shield,at the perforation. Use the outertemplate when cutting the dry-wall. Although the SSLCR maybe oriented either horizontallyor vertically, the installationprocedure is the same.TemplateLevelNote: Always allow at leastone-half inch between a wallstud and the speaker cutout, orthe locking tabs will not be ableto swivel into place.≥1/2"≥1/2"≥1/2"Cut the drywall. Connect the speaker wiresto the speaker.Replace the metal grille. For theSSLCR only, attach the JBL logoto the grille to correspond tovertical or horizontal installation.Place the frame assemblyin the wall.Screw down each of the four(six for SSLCR) Phillips-headscrews. The locking tabs willswivel into place and securethe unit to the rear surface ofthe drywall.JBL Performance Specialistspeakers feature unique swivelmounts for the tweeters thatenable you to aim the verydirectional high frequenciestoward the listening position,at ear-level height. Beforeinstalling the speaker grille,gently press on the outer edgeof the tweeter mount to adjustthe position of the tweeter. Thetweeter will not swivel morethan 15 degrees in any direc-tion; do not attempt to force itto move further. You may alsorotate the tweeter to orient theJBL logo as desired. |
Related manuals for JBL Performance Specialist SS6
manualsdatabase
Your AI-powered manual search engine