JBL SDP-3 Installation & Technical Manual

Also see for SDP-3: Quick reference guide

SDP-3 Digital Surround Processor/Controller AC-3 Effects and Parameters55Parameter Initial Value RangeCENTER MIX 14 0-30SURROUND MIX +2dB -5 to +5dBCENTER DLY SAMPLES +0 -127 to +127MASTER LEVEL +0dB -5dB to +5dBLFE MIX LEVEL -5.0dB -20dB to 0dBSUBWOOFER LVL -5dB -10dB to +10dBCUSTOM/TRIGGER DISABLE ENABLE, DISABLEDTS Effects are compatible with DTS Digital Surround input signals.Any DTS-capable software and/or source components should belabeled with a logo, similar to the one on the SDP-3 front panel.DTS 2-ChannelThis Effect mixes DTS Digital 5.1 information for two-channel playback.These soundtracks can be recorded onto two-channel formats, orplayed back through left and right front speakers. The mix is designedto play back with full surround when decoded through Logic 7. In mixinga film with very heavy use of the Low Frequency Effects Channel, it maybe desirable to lower LFE MIX LEVEL.Parameter Initial Value RangeRE-EQUALIZER OFF ON, OFFBASS ENHANCE OFF ON, OFFREAR DLY OFFSET 0ms 0-20msSIDE LEVEL +0dB -5dB to +5dBREAR LEVEL +0dB -5dB to +5dBLFE MIX LEVEL -5.0dB -10dB to +10dBSUBWOOFER LVL -5dB -10dB to +10dBCUSTOM/TRIGGER ENABLE ENABLE, DISABLEDTS MusicThis Effect enhances playback of DTS music recordings, or DTS filmsoundtracks with strong musical content. This effect contains many ofthe features found in DTS LOGIC 7, with settings that are moreappropriate for music.5DTS Effects and Parameters