MODE ADJUST JBL Synthesis5-2MODE ADJUSTSelecting the MAIN MENU MODE ADJUST option opens the MODE ADJUST menu shown atthe left, which can be used to select a listening mode for adjustment. When the MODEADJUST menu opens, the currently activated Main Zone listening mode is highlighted.Selecting a listening mode does not activate that listening mode for the current MainZone input source. Rather, selecting a listening mode opens the corresponding listeningmode menu, which can be used to customize the activated listening mode. These adjustmentsare applied when that listening mode is selected with one of the methods described in theListening Mode Activation section that begins below.LISTENING MODE ACTIVATIONListening modes are available for 2-channel, Dolby Digital, dts(-ES), and analog input sources.The SDP-5 allows listening mode selection for all Main Zone sources. In some cases, theSDP-5 automatically activates a listening mode in response to certain commands. For thisreason, it is important to understand the three methods through which listening modeactivation occurs.Listening modes can be activated with:• the INPUT SETUP menu preferred listening mode selection parameters (3-13)• the front panel or remote control Mode and buttons (2-3, 2-14)• the remote control mode family selection buttons (2-16)MODE ADJUSTL7 FILML7 TVL7 MUSICL7 MUSIC SURR%!PLII + THX%!PLII MOVIE%!PLII MUSIC%!PRO LOGICdts neo:6 FILMdts neo:6 MUSICNIGHTCLUBCONCERT HALLCHURCHCATHEDRALPANORAMAPARTY2-CHANNELMONO LOGICMONO SURROUNDMONO5.1 L7 FILM5.1 L7 TV5.1 L7 MUSIC5.1 THXI*5.1 THXI MUSIC%!DIGITAL*5.1 2-CHANNEL5.1 MONO LOGIC5.1 MONO SURR5.1 MONODTS-ES L7 FILM*DTS-ES L7 MUSIC*DTS-ES THX *DTS THXI MUSICDTS-ES*DTS-ES 2-CHAN*5.1a BYPASS2CH BYPASSMAIN MENUMODE ADJUSTAUDIO CONTROLSSETUPMODE ADJUST * These listening mode names differ depending onthe input source, the speaker configuration, andcertain parameter settings. Refer to the ListeningMode Descriptions section that begins on the nextpage for more information.