JBL SIMPLY CINEMA ESC200 Setup Manual

Also see for SIMPLY CINEMA ESC200: Service manual Simple setup guide

Contents

JBL SIMPLY CINEMA ESC200 Setup Manual Manual pdf 11 page image

Troubleshootingeleven. Bass BoostBASSBOOSTTESTBOOST INPUT 1/2PRO CONCERTCENTERVOLUMEFRONTREARLEFT RIGHTHALL STEREO– BASSBASSTREBLE–––++++ESC200TM+–+–+–+–BASS BASSBOOSTTREBLE FRONTSTEREOHALLREARPOWER INPUT 1/2VOLUME CENTERBALANCE RIGHTCONCERTPRO LOGICLEFTIf you hear no sound at all,check the following:• Make sure the processor/amplifier is plugged into alive electrical outlet and thatthe power switch is on.• Check the connectionsfrom the TV or VCR to theprocessor/amplifier.• If using with a television,make sure the TV is on and asignal is present.• If using with a VCR, makesure the VCR is playinga tape.• Check all connectionsbetween processor/amplifierand each of the speakers.If one or more of thespeakers does not play,check the following:• Check all connectionsbetween processor/amplifierand each of the speakers.• Adjust the balance controlsfrom left to right and frontto rear.If you have very littlebass output, check thefollowing:• Make sure the subwoofer isconnected properly to theprocessor/amplifier.• Experiment with placementof the subwoofer. Remember,place the subwoofer in a cor-ner to get maximum bass out-put from the system.• Make sure “Bass Boost”is on.• Adjust “Bass” level.If there is no sound comingfrom the rear speakers orthe volume is very low,check the following:• Check all connectionsbetween processor/amplifierand each of the speakers.• Adjust the front-rearbalance controls on theprocessor/amplifier.• Make sure the TV show ormovie you are watching isrecorded in Dolby* Surround.If it is not, try the “ConcertHall” or “Stereo” settings onthe processor/amplifier.

/ 12

Related manuals for JBL SIMPLY CINEMA ESC200