2ImPortant SaFetY InStrUctIonSRead these instructions.1.Keep these instructions.2.Heed all warnings.3.Follow all instructions.4.Do not use this apparatus near water.5.Clean only with dry cloth.6.Do not block any ventilation openings. Install in accordance with the7.manufacturer’s instructions.Do not install near any heat sources such as radiators, heat registers,8.stoves, or other apparatus (including amplifiers) that produce heat.Do not defeat the safety purpose of the polarized or grounding-type plug.9.A polarized plug has two blades with one wider than the other.A grounding-type plug has two blades and a third grounding prong.The wide blade or third prong is provided for your safety. If theprovided plug does not fit into your outlet, consult an electrician forreplacement of the obsolete outlet.Protect the power cord from being walked on or pinched, particularly at10.the plugs, convenience receptacles and the point where they exit fromthe apparatus.Only use attachments/accessories specified by the manufacturer.11.Use only with the cart, stand, tripod, bracket or table12.specified by the manufacturer or sold with the apparatus.When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.Unplug this apparatus during lightning storms or when13.unused for long periods of time.Refer all servicing to qualified service personnel. Servicing is required14.when the apparatus has been damaged in any way, such as: whenthe power supply cord or plug has become damaged, when liquidhas been spilled or objects have fallen into the apparatus, when theapparatus has been exposed to rain or moisture, when the apparatusdoes not operate normally, or the apparatus has been dropped.Do not expose this apparatus to dripping or splashing and ensure that no15.objects filled with liquids, such as vases, are placed on the apparatus.To completely disconnect this apparatus from the AC mains, disconnect16.the power supply cord plug from the AC receptacle.The mains plug of the power supply cord shall remain readily operable.17.Do not expose batteries to excessive heat such as sunshine, fire or the18.like.The lightning flash with arrowhead symbol, within an equilateraltriangle, is intended to alert the user to the presence of uninsulated“dangerous voltage” within the product’s enclosure that may beof sufficient magnitude to constitute a risk of electric shock topersons.The exclamation point within an equilateral triangle is intendedto alert the user to the presence of important operatingand maintenance (servicing) instructions in the literatureaccompanying the product.WARNING: To reduce the risk of fire or electric shock, do not expose thisapparatus to rain or moisture.IMPORTANT: The subwoofer requires proper ventilation and is not to beused in an enclosed environment.USIng the SUPPlIed SPIkeSFour metal spikes are supplied for use when you place the subwoofer on acarpeted surface. Using the spikes decouples the subwoofer from the floorand prevents unwanted acoustic damping.TO INseRT The sPIkes:Gently turn the subwoofer upside down on a soft, nonabrasive surface.1.Unscrew and remove the rubber bumpers from the subwoofer’s feet.2.Screw each spike into the threaded insert in each foot. Make sure all3.four spikes are screwed in completely for stability.NOTe: NEVER drag the subwoofer to move it, as this will damage thespikes, the feet and/or the subwoofer cabinet itself. Always lift the sub-woofer and carry it to its new location.